Yamaha FJR 1300 AE 2014 Service Manual page 662

EAS28370
CHECKING THE AIR INDUCTION SYSTEM
SOLENOID
1. Check:
• Air induction system solenoid resistance
Out of specification → Replace.
Solenoid resistance
20–24 Ω
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Disconnect the air induction system solenoid
coupler from the wire harness.
b. Connect the pocket tester (Ω × 1) to the air in-
duction system solenoid terminals as shown.
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
• Positive tester probe →
Air induction system solenoid terminal "1"
• Negative tester probe →
Air induction system solenoid terminal "2"
2
c. Measure the air induction system solenoid re-
sistance.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS28390
CHECKING THE CYLINDER
IDENTIFICATION SENSOR
1. Check:
• Cylinder identification sensor output voltage
Out of specification → Replace.
Cylinder identification sensor
output voltage (ON)
More than 4.8 V
Cylinder identification sensor
output voltage (OFF)
Less than 0.8 V
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
1
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
ELECTRICAL COMPONENTS
▼ ▼▼▼ ▼ ▼▼▼ ▼
a. Connect the test harness– speed sensor (3P)
"1" to the cylinder identification sensor cou-
pler and wire harness as shown.
b. Connect the pocket tester (DC 20 V) to the
test harness– speed sensor (3P).
▼▼▼
• Positive tester probe →
white/black (wire harness color)
• Negative tester probe →
black/blue (wire harness color)
1
c. Turn the main switch to "ON".
d. Rotate the crankshaft.
e. Measure the voltage of white/black and
black/blue. Turn the crankshaft twice and
check that the output voltage rises to approx-
imately 4.8 V once.
▲ ▲▲▲ ▲ ▲▲▲ ▲
▲▲▲
EAS1MC1028
CHECKING THE INTAKE AIR PRESSURE
SENSOR
1. Check:
• Intake air pressure sensor output voltage
Out of specification → Replace.
▼ ▼▼▼ ▼ ▼▼▼ ▼
a. Connect the test harness S– pressure sensor
(3P) "1" to the intake air pressure sensor and
wire harness as shown.
8-211
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
Test harness– speed sensor (3P)
90890-03208
YU-03208
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
Intake air pressure sensor output
voltage
3.57–3.71 V
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
▼ ▼▼▼ ▼ ▼▼▼
▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼▼▼