8. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-191.
OK ↓
9. Check the gear position switch.
Refer to "CHECKING THE
SWITCHES" on page 8-191.
OK ↓
10.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-191.
OK ↓
11.Check the clutch switch.
Refer to "CHECKING THE
SWITCHES" on page 8-191.
OK ↓
12.Check the start/engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 8-191.
OK ↓
13.Check the entire starting system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-7.
OK ↓
The starting system circuit is OK.
ELECTRIC STARTING SYSTEM
NG →
Replace the main switch/immobilizer unit.
NG →
Replace the gear position switch.
NG →
Replace the sidestand switch.
NG →
Replace the clutch switch.
NG →
• The start/engine stop switch is faulty.
• Replace the right handlebar switch.
NG →
Properly connect or replace the wire har-
ness.
8-11