Yamaha FJR 1300 AE 2014 Service Manual page 47

Odometer display:
ODO
Tripmeter displays:
TRIP-1
TRIP-2
"TRIP-1" and "TRIP-2" show the distance trav-
eled since they were last set to zero.
When approximately 5.5 L (1.45 US gal, 1.21
Imp.gal) of fuel remains in the fuel tank, the last
segment of the fuel meter starts flashing. In ad-
dition, the information display will automatically
change to the fuel reserve tripmeter mode
"TRIP-F" and start counting the distance trav-
eled from that point.
GEAR
4
TRIP-F
In that case, pushing the select switch switches
the display between the various information dis-
plays in the following order;
km
20
km
5.0
km
7.0
km
3.4
TRIP-F → Display-1 → Display-2 →
Display-3 → TRIP-F
To reset a tripmeter, push the select switch to
select the information display that contains the
tripmeter. Push the "RESET" button briefly so
that the tripmeter flashes, and then push the
"RESET" button again for at least 2 seconds
while the tripmeter is flashing. If you do not reset
the fuel reserve tripmeter manually, it will reset
itself automatically and the display will return to
the prior mode after refueling and traveling 5 km
(3 mi).
Estimated traveling range display:
RANGE
The distance that can be traveled with the re-
maining fuel in the fuel tank under the current
riding conditions is shown.
Elapsed time display:
TIME TRIP
The time that has elapsed since the main switch
was turned to "ON" is shown. The maximum
time that can be shown is 99:59.This display is
automatically reset when the main switch is
turned to "OFF".
TIP
There are also "TIME-2" and "TIME-3" elapsed
time displays, but they cannot be set to the infor-
mation display. Refer to "Setting mode".
1-38
FEATURES
km
11
0:06