c. If the heavy spot does not stay in that posi-
tion, install a heavier weight.
d. Repeat steps (b) and (c) until the front wheel
is balanced.
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
4. Check:
• Front wheel static balance
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Turn the front wheel and make sure it stays at
each position shown.
b. If the front wheel does not remain stationary
at all of the positions, rebalance it.
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
EAS22000
INSTALLING THE FRONT WHEEL (FRONT
BRAKE DISCS)
1. Install:
• Front brake discs
Front brake disc bolt
18 Nm (1.8 m·kg, 13 ft·lb)
LOCTITE®
TIP
Tighten the brake disc bolts in stages and in a
crisscross pattern.
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
2. Check:
• Front brake discs
Refer to "CHECKING THE FRONT BRAKE
DISCS" on page 4-42.
3. Lubricate:
▲▲▲
• Oil seal lips
▼▼▼
4. Install:
• Collars
• Front wheel sensor housing
• Front wheel
TIP
Align the slot in the front wheel sensor housing
with the projection of the front fork before as-
sembly.
▲▲▲
5. Install:
• Front wheel axle
• Front wheel axle bolt
• Front wheel axle pinch bolts
4-28
FRONT WHEEL
Recommended lubricant
Lithium-soap-based grease
Front wheel axle bolt
91 Nm (9.1 m·kg, 66 ft·lb)
Front wheel axle pinch bolt
21 Nm (2.1 m·kg, 15 ft·lb)