Returning To Service - KSB CalioTherm Pro 25 Installation & Operating Manual

6 Commissioning/Start-up/Shutdown

6.4 Returning to service

WARNING
Failure to re-install or re-activate protective devices
Risk of injury from moving parts or escaping fluid!
▷ As soon as the work is completed, properly re-install and re-activate any safety-
relevant devices and protective devices.
For returning the equipment to service, observe the sections on commissioning/start-
up (ð Section 6.1, Page 34) and the operating limits (ð Section 6.2, Page 36) .
In addition, carry out all servicing/maintenance operations before returning the
pump (set) to service. (ð Section 8, Page 67)
CalioTherm Pro
39 of 76