Eu Declaration Of Conformity - KSB CalioTherm Pro 25 Installation & Operating Manual

Manufacturer:
This EU Declaration of Conformity is issued under the sole responsibility of the manufacturer.
The manufacturer herewith declares that the product:
From serial number: xxxxxxxx-A202034-00001
▪ is in conformity with the provisions of the following directives / regulations as amended from time to time:
– 2006/42/EC Machinery Directive
(The safety objectives set out in the 2014/35/EU EC Directive on Low-voltage Equipment are observed.)
– 2011/65/EU: Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
(RoHS)
– 2014/30/EU: Electromagnetic Compatibility (EMC)
The manufacturer also declares that
▪ the following harmonised international standards have been applied:
– EN 809: 1998+A1:2009/AC:2010
– EN 55014-1:2017+A11:2020
– EN 60335-1:2012+AC:2014+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019+A15:2021
– EN 60335-2-51:2003+A1:2008+A2:2012
▪ the following international standards have been applied:
– EN 55014-2:2015
– EN 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:2019
Person authorised to compile the technical file:
Jennifer Watson
Product Development Pump Systems & Drives
KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
The EU Declaration of Conformity was issued in/on:
Frankenthal, 7 February 2023
72 of 76

11 EU Declaration of Conformity

11 EU Declaration of Conformity
KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
Calio-Therm
Jochen Schaab
Head of Product Development Pump Systems & Drives
KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
CalioTherm Pro