KSB CalioTherm Pro 25 Installation & Operating Manual page 64

64 of 76
7 Operation
Table 38: Activating and disabling Dynamic Control
Step 1: Activating the additional function setting mode
▪ Press and hold the control button for 10 seconds.
– The additional functions setting mode is active.
Step 2: Selecting Dynamic Control
▪ Turn the dial and select the required function.
dc0 / dc1
Step 3: Activating the setting mode
▪ Press the control button.
Step 4: Activating/disabling Dynamic Control
▪ Turn the dial and select the required status.
– dc0 = Dynamic Control disabled.
– dc1 = Dynamic Control activated.
Step 5: Confirming the settings
▪ Press the control button.
– The symbol lights up in green.
ECO
CalioTherm Pro