Additional Functions; Locking The Control Panel - KSB CalioTherm Pro 25 Installation & Operating Manual

7 Operation

7.4 Additional functions

7.4.1 Locking the control panel

Table 36: Locking / unlocking the control panel
Step 1: Activating the additional function setting mode
▪ Press and hold the control button for 10 seconds.
– The additional functions setting mode is active.
– The current status of the control panel is shown.
Step 2: Activating the setting mode
▪ Press the control button.
H-0 / H-L
Step 3: Locking / unlocking the control panel
▪ Turn the dial and select the required status.
– H-L = control panel locked
– H-O = unlock control panel
Step 4: Confirming the setting
▪ Press the control button.
NOTE
Only when the control panel is unlocked can operating modes and functions be set
and settings be reset to factory settings.
CalioTherm Pro
61 of 76