Table of Contents
Advertisement
88
Maintenance Section
Engine Oil and Filter - Change
Illustration 64
1. Remove drain cap (4) from engine oil pan outlet (3)
and drain the oil into a suitable container for
storage or disposal.
2. Clean the oil drain cap.
3. Install drain cap (4) to the engine oil pan outlet (3).
Tighten the drain cap to a torque of 18 N·m
(159.31 lb in).
Illustration 65
1. Remove drain plug (6) from engine oil pan outlet
(5) and drain the oil into a suitable container for
storage or disposal.
2. Clean oil drain plug (6).
3. Install drain plug (6) to engine oil pan outlet (5).
Tighten the drain plug to a torque of 26 N·m
(230.12 lb in).
Copyright of Perkins Engine Company Limited. NOT FOR REPRINTING OR RESALE
g06518231
Illustration 66
1. Remove drain plug (8) from the engine oil pan and
drain the oil into a suitable container for storage or
disposal.
2. Remove sealing washer (7) from the drain plug
and clean the oil drain plug.
3. Install new sealing washer (7) to the drain plug.
4. Install drain plug (8) to the engine oil pan. Tighten
the drain plug to a torque of 23 N·m (203.57 lb in)
• If the engine is equipped with a drain valve, turn
the drain valve knob counterclockwise to drain the
oil. After the oil has drained, turn the drain valve
knob clockwise to close the drain valve.
Replace the Oil Filter
Perkins oil filters are built to Perkins specifications.
Use of an oil filter not recommended by Perkins could
result in severe engine damage to the engine bear-
ings, crankshaft, etc., as a result of the larger waste
particles from unfiltered oil entering the engine lubri-
cating system. Only use oil filters recommended by
g06523773
Perkins.
1. Remove the oil filter with a suitable tool.
M0087369-08
g06530622
NOTICE
Advertisement
Table of Contents
