Perkins 402J-05 Operation And Maintenance Manual page 60

Operation and maintenance manual
Table of Contents

Advertisement

60
Maintenance Section
General Fuel Information
General Information
Every attempt is made to provide accurate, up-to-
date information. By use of this document you agree
that Perkins Engines Company Limited is not respon-
sible for errors or omissions.
These recommendations are subject to change with-
out notice. Contact your local Perkins distributor for
the most up-to-date recommendations.
Diesel Fuel Requirements
Perkins is not in a position to continuously evaluate
and monitor all worldwide distillate diesel fuel
specifications that are published by governments and
technological societies.
The "Perkins Specification for Distillate Diesel Fuel"
provides a known reliable baseline to judge the
expected performance of distillate diesel fuels that
are derived from conventional sources.
Satisfactory engine performance depends on the use
of a good quality fuel. The use of a good quality fuel
will give the following results: long engine life and
acceptable exhaust emissions levels. The fuel must
meet the minimum requirements that are stated in
the table 35 .
The footnotes are key part of the Perkins "Specifica-
tion for Distillate Diesel Fuel" Table. Read ALL of the
footnotes.
Table 35
Property
Aromatics
Ash
Carbon Residue on 10%
Bottoms
Cetane Number
(1)
Cloud Point
Copper Strip Corrosion
Copyright of Perkins Engine Company Limited. NOT FOR REPRINTING OR RESALE
NOTICE
NOTICE
NOTICE
"Perkins Specification for Distillate Diesel Fuel"
UNITS
Requirements
%Volume
35% maximum
%Weight
0.01% maximum
%Weight
0.20% maximum
-
40 minimum in North
America
45 minimum in European
Union
°C
The cloud point must not
exceed the lowest expected
ambient temperature.
-
No. 3 maximum
"ASTM"Test
"ISO/Other"Test
"D1319"
"ISO 3837"
"D482"
"ISO 6245"
"D524"
"ISO 4262"
"D613 or D6890"
"ISO 5165"
"D2500"
"ISO 3015"
"D130"
"ISO 2160"
M0087369-08
(continued)

Advertisement

Table of Contents
loading

Table of Contents