Table of Contents
Advertisement
M0087369-08
Engine Service Requirements
Aggressive properties of biodiesel fuel may cause
debris in the fuel tank and fuel lines. The aggressive
properties of biodiesel will clean the fuel tank and fuel
lines. This cleaning of the fuel system can
prematurely block the fuel filters. Perkins recommend
that after the initial usage of B20 biodiesel blended
fuel the fuel filters must be replaced at 50 hours.
Glycerides present in biodiesel fuel will also cause
fuel filters to become blocked more quickly. Therefore
the regular service interval should be reduced to 250
hours.
When biodiesel fuel is used, crank case oil and
aftertreatment systems may be influenced. This
influence is due to the chemical composition and
characteristics of biodiesel fuel, such as density and
volatility, and to chemical contaminants that can be
present in this fuel, such as alkali and alkaline metals
(sodium, potassium, calcium, and magnesium).
• Crankcase oil fuel dilution can be higher when
biodiesel or biodiesel blends are used. This
increased level of fuel dilution when using
biodiesel or biodiesel blends is related to the
typically lower volatility of biodiesel. In-cylinder
emissions control strategies utilized in many of the
industrial latest engine designs may lead to a
higher level of biodiesel concentration in the
sump. The long-term effect of biodiesel
concentration in crankcase oil is unknown
currently.
• Perkins recommend the use of oil analysis to
check the quality of the engine oil if biodiesel fuel
is used. Ensure that the level of biodiesel in the
fuel is noted when the oil sample is taken.
Performance Related Issues
Due to the lower energy content than the standard
distillate fuel B20 will cause a power loss in order of 2
to 4 percent. In addition, over time the power may
deteriorate further due to deposits in the fuel
injectors.
Biodiesel and biodiesel blends are known to cause
an increase in fuel system deposits, most significant
of which are deposits within the fuel injector. These
deposits can cause a loss in power due to restricted
or modified fuel injection or cause other functional
issues associated with these deposits.
Note: Perkins Fuel Cleaner (part number T400012)
is most effective in cleaning and preventing the
formation of deposits. Perkins Diesel Fuel
Conditioner helps to limit deposit issues by improving
the stability of biodiesel and biodiesel blends. For
more information refer to Perkins Diesel Fuel
Cleaner.
Copyright of Perkins Engine Company Limited. NOT FOR REPRINTING OR RESALE
Biodiesel fuel contains metal contaminants (sodium,
potassium, calcium, and/or magnesium) that form
ash products upon combustion in the diesel engine.
The ash can have an impact on the life and
performance of aftertreatment emissions control
devices and can accumulate in DPF. The ash
accumulation may cause the need for more frequent
ash service intervals and cause loss of performance
General Requirements
Biodiesel has poor oxidation stability, which can
result in long-term problems in the storage of
biodiesel. Biodiesel fuel should be used within 6
months of manufacture. Equipment should not be
stored with the B20 biodiesel blends in the fuel
system.
Due to poor oxidation stability and other potential
issues, it is strongly recommended that engines with
limited operational time either not use B20 biodiesel
blends or, whilst accepting some risk, limit biodiesel
blend to a maximum of B5. Examples of applications
that should limit the use of biodiesel are the following:
Standby Generator sets and certain emergency
vehicles.
For standby generator sets and emergency vehicles
that cannot avoid use of biodiesel blends fuel quality
in the engine fuel tank must be sampled and checked
monthly. Test should include acid number
(EN14104), oxidation stability (EN 15751 commonly
know as the Rancimant test ), and sediment
(ISO12937). For standby generator sets oxidation
stability of biodiesel blend must be 20 hours or more
as per EN 15751. If the test shows that the fuel has
degraded, fuel tank must be drained and engine
flushed by running with the fresh high-quality diesel
fuel.
Perkins strongly recommended that seasonally
operated engines have the fuel systems, including
fuel tanks, flushed with conventional diesel fuel
before prolonged shutdown periods. An example of
an application that should seasonally flush the fuel
system is a combine harvester.
Microbial contamination and growth can cause
corrosion in the fuel system and premature plugging
of the fuel filter. Consult your supplier of fuel for
assistance in selecting appropriate anti-microbial
additive.
Water accelerates microbial contamination and
growth. When biodiesel is compared to distillate
fuels, water is naturally more likely to exist in the
biodiesel. Therefore check frequently and if
necessary, drain the water separator.
Materials such as brass, bronze, copper, lead, tin,
and zinc accelerate the oxidation process of the
biodiesel fuel. The oxidation process can cause the
formation of deposits therefore these materials must
not be used for fuel tanks and fuel lines.
65
Maintenance Section
General Fuel Information
Advertisement
Table of Contents
