Perkins 402J-05 Operation And Maintenance Manual page 100

100
Maintenance Section
Fuel System Secondary Filter - Replace
6. Fasten the assembly to the fuel filter base with
setscrew (2).
The fuel system will need to be primed after the new
filter is installed. Refer to this Operation and
Maintenance Manual, "Fuel System - Prime".
Fuel Filter with Element
1. Close the fuel supply valve (1).
Illustration 84
Typical example
2. Clean the outside of the fuel filter assembly.
3. Loosen the locking ring (2).
4. Remove the casing (3) for the filter and the
element. Ensure that any fluid is drained into a
suitable container.
Copyright of Perkins Engine Company Limited. NOT FOR REPRINTING OR RESALE
g01334893
Illustration 85
Typical example
Note: Do not fill the fuel filter with fuel. The fuel will
not be filtered and the fuel could be contaminated.
Contaminated fuel can damage your fuel system.
5. Assemble the following items: new seal (5), new
filter element (6), and casing (3).
6. Install the assembled items to the filter base (4).
7. Install the locking ring (2) to the filter head. Rotate
the locking ring to lock the assembly.
The fuel system will need to be primed after the new
filter is installed. Refer to Operation and Maintenance
Manual, "Fuel System - Prime".
Fuel Filter with Priming Pump
1. Close the fuel supply valve.
2. Clean the outside of the fuel filter assembly.
M0087369-08
g01334895