Table of Contents
Advertisement
multifunctional window will start flashing: use
sensor type (there are six choices: L-0，L-1，L-2，L-3，L-4. L-5. L-0 stands for 'no
temperature sensor used'). Every time you press the button, the temperature sensor type
will change; when the needed type is displayed, press
automatically enter the next setting;
8)
Generator temperature sensor type setting: the same as 7.
9)
High temperature shutdown limit setting: engine temperature indicator illuminates,
multifunctional window first digit will start flashing, use
value from 0 to 9 and
flashing, use
multifunctional window third digit will start flashing, use
value from 0 to 9 and
of temperature setting is 1-600℃ and it is invalid when outside this range.
10) Turn the start key from ON to OFF position to finish configuration.
NOTE: during configuration use
previous.
CAUTION: Please change inner controller parameters (rated generator voltage, generator frequency etc.)
only in standby mode, otherwise in can lead to shutdown or other abnormal condition.
HGM501 Genset Controller User Manual
to confirm; multifunctional window second digit will start
and
to choose a value from 0 to 9 and
to confirm and enter the next setting automatically; the range
button to enter the next menu item and
and
to select temperature
button to confirm and
and
to choose a
and
to choose a
to return to the
Page 14 of 17
to confirm;
Advertisement
Table of Contents
