Drive System
Maintenance
Checking the Seat Belt
Service Interval: Before each use or daily
Inspect the seat belt for wear, cuts, and proper
operation of the retractor and buckle. Replace the
seat belt if it is damaged.
Checking the
Rollover-Protection-System
(ROPS) Knobs
Service Interval: Before each use or daily
WARNING
To avoid injury or death from rollover: keep
the roll bar in the fully raised locked position
and use the seat belt.
Ensure that the seat is secured to the
machine.
Check that both the mounting hardware and the knobs
are in good working condition. Make sure that the
knobs are fully engaged with the ROPS in the raised
position. The upper hoop of the roll bar may need to
be pushed forward or pulled rearward to fully engage
both knobs
(Figure
59).
All manuals and user guides at all-guides.com
49
Figure 59
1. ROPS knob (locked
position)
2. Pull the ROPS knob out,
and rotate it 90 degrees
to change the roll bar
position.
g008943
3. Roll bar in the upright
position
4. Roll bar in the folded
position