Table of Contents
Advertisement
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
To adjust the seat, move the lever sideways to unlock
seat
(Figure
32).
Figure 32
All manuals and user guides at all-guides.com
Using the Drive-Wheel
Release Valves
Hands may become entangled in the rotating
drive components below the engine deck,
which could result in serious injury.
Stop the engine, remove the key, and wait for
all moving parts to stop before accessing the
drive-wheel release valves.
The engine and hydraulic drive units can
become very hot. Touching a hot engine or
g008962
hydraulic drive units can cause severe burns.
Wait for the engine and hydraulic drive units
to cool completely before accessing the
drive-wheel release valves.
The drive-wheel release valves are located in the
back of each hydraulic drive unit, under the seat.
Note:
fully horizontal position when operating the machine
or severe damage to the hydraulic system can occur.
30
WARNING
WARNING
Make sure that the release valves are in the
1.
Disengage the blade-control switch (PTO) and
turn the ignition key to off. Move the levers to the
N
-
position and apply the parking
EUTRAL
LOCK
brake. Remove the key.
2.
Rotate the release-valve levers vertically to push
the machine
(Figure
Note:
This allows hydraulic oil to bypass the
pump, enabling the wheels to turn.
3.
Disengage the parking brake before pushing
the machine.
33).
Advertisement
Table of Contents
