Figure 25
1. Deck-lift pedal
2. Height-of-cut pin
All manuals and user guides at all-guides.com
g027343
3. Transport lock
Adjusting the Anti-Scalp
Rollers
Whenever you change the height-of-cut, adjust the
height of the anti-scalp rollers.
1.
Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and set the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
1. Anti-scalp roller
2. Spacer
3. Bushing
27
EUTRAL
Figure 26
4. Flange nut
5. Bolt
-
LOCK
g000942