Table of Contents
Advertisement
Cooling System
Maintenance
Cleaning the Engine Screen
and Engine-Oil Cooler
Service Interval: Before each use or daily
Remove any buildup of grass, dirt, or other debris
from the oil cooler
(Figure
adequate cooling, correct engine speed, and reduces
the possibility of overheating and mechanical damage
to the engine.
Figure 70
All manuals and user guides at all-guides.com
70). This helps ensure
Cleaning the Engine
Cooling Fins and Shrouds
Service Interval: Every 100 hours/Yearly (whichever
1.
Disengage the blade-control switch (PTO) and
set the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Remove the air intake screen, recoil starter, and
fan housing
4.
Clean the debris and grass from the engine
parts.
5.
Install the air-intake screen, recoil starter, and
fan housing
g008804
g009191
1. Engine guard
2. Engine air-intake screen
3. Bolt
54
comes first)
(Figure
71).
(Figure
71).
Figure 71
4. Fan housing
5. Screw
g004218
Advertisement
Table of Contents
