Product Overview; Controls - Toro 74958 Operator's Manual

Product Overview

1. Height-of-cut deck-lift
pedal
2. Transport lock
3. Parking-brake lever

4. Controls

5. Motion-control levers
Controls
Become familiar with all the controls before you start
the engine and operate the machine
Figure 5).
1. PTO Switch
2. Throttle control
3. Malfunction indicator light
(MIL)
All manuals and user guides at all-guides.com
Figure 4
6. Roll bar
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
(Figure 4
Figure 5
4. Hour meter
5. Ignition switch
6. Fuses
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance
g027333
1. Fuel gauge (bars)
2. Battery light
3. Hour meter
Fuel Gauge
The fuel gauge is located with the hour meter and the
bars light up when the ignition switch is on
The indicator light appears when the fuel level is low
(approximately 1 gallon remaining in the fuel tank).
and
Safety-Interlock Indicators
There are symbols on the hour meter and they indicate
with a black triangle that the interlock component is in
the correct position
Battery-Indicator Light
If you turn the ignition key to the O
few seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when you turn the ignition
on and when the charge is below the correct operating
level (Figure
g013112
Throttle Control
The throttle control is variable between the F
S positions.
LOW
Blade-Control Switch (PTO)
Use the blade-control switch (PTO) to engage the
electric clutch and drive the mower blades. Pull the
14
(Figure 6).
Figure 6
4. Safety-interlock symbols
5. Low-fuel indicator light
(Figure 6).
N
6).
g008950
(Figure 6).
position for a
and
AST