Using The Side Discharge; Transporting The Machine - Toro 74958 Operator's Manual

With 60in side discharge mower
Hide thumbs Also See for 74958:
Table of Contents

Advertisement

Figure 33
1. Vertical to push the
machine
4.
Rotate the release-valve levers horizontally to
run the machine
(Figure

Using the Side Discharge

The mower has a hinged grass deflector that
disperses clippings to the side and down toward the
turf.
DANGER
Without a grass deflector, discharge cover, or
a complete grass-catcher assembly mounted
in place, you and others are exposed to blade
contact and thrown debris. Contact with
rotating mower blade(s) and thrown debris
cause injury or death.
• Never remove the grass deflector from
the mower because the grass deflector
routes material down toward the turf. If the
grass deflector is ever damaged, replace it
immediately.
• Never put your hands or feet under the
mower.
• Never try to clear the discharge area
or mower blades unless you move the
blade-control switch (PTO) to the O
position, rotate the ignition key to the O
position, and remove the key.
• Make sure that the grass deflector is in the
down position.
All manuals and user guides at all-guides.com
g015123
2. Horizontal to run the
machine
33).
FF
FF

Transporting the Machine

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required
by law. Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets, or bystanders avoid injury.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous
and can lead to accidents, causing personal
injury.
Do not drive the machine on a public street
or roadway.
To transport the machine:
1.
If you are using a trailer, connect it to the towing
vehicle and connect the safety chains.
2.
If applicable, connect the trailer brakes.
3.
Load the machine onto the trailer or truck.
4.
Shut off the engine, remove the key, set the
brake, and close the fuel valve.
5.
Use the metal tie-down loops on the machine to
securely fasten the it to the trailer or truck with
straps, chains, cable, or ropes
1. Traction unit tie-down loops
31
(Figure
34).
Figure 34
g027338

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master commercial turbo force 3000 series

Table of Contents