Servicing The Engine Oil - Toro 74958 Operator's Manual

Servicing the Engine Oil

Oil Type: Detergent oil (API service class SJ or
higher)
Oil Capacity: with a filter change, 1.7 L (58 oz); with
no filter change, 1.4 L (48 oz)
Viscosity: See the table below.
Figure 45
Note:
Use of synthetic oil having 5W-20 or 5W-30
rating is acceptable, up to 4° C (40° F).
Note:
Synthetic oils provide better starting in extreme
cold below -23° C (-10° F).
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Note:
Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing, and other
body parts away from the muffler and other
hot surfaces.
Important:
Do not overfill the crankcase with oil
because that could damage engine. Do not run
engine with oil below the Low mark because the
engine may be damaged.
1. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and set the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position
All manuals and user guides at all-guides.com
-
EUTRAL LOCK
(Figure 46).
g000238
41
Figure 46
g008804
g027659