Table of Contents
Advertisement
Important:
Refer to your engine owner's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Lubrication
Grease more frequently when operating conditions
are extremely dusty or sandy.
Grease Type: No. 2 lithium or molybdenum-base
grease
1.
Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and set the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Clean the grease fittings with a rag.
Note:
Make sure to scrape any paint off the
front of the fitting(s).
4.
Connect a grease gun to the fitting and pump
grease into the fittings until grease begins to
ooze out of the bearings.
5.
Wipe up any excess grease.
All manuals and user guides at all-guides.com
Adding Light Oil or Spray
Lubrication
Service Interval: Every 100 hours
Lubricate the deck-lift pivots.
-
EUTRAL
LOCK
36
Figure 37
Figure 38
g017028
g017050
Advertisement
Table of Contents
