Jacking Point Locations; Lubrication; Greasing The Bearings And Bushings - Toro Reelmaster 5610-D Operator's Manual

Jacking Point Locations

Note:
Support the machine with jack stands whenever you work under the machine.
Use the following as machine-lift points:
• Front—the jack brackets of the front-axle tube.
• Rear—the rear-axle tube.
Front of the machine
Jack brackets (front-axle tube)

Lubrication

Greasing the Bearings and Bushings

The machine has grease fittings that must be lubricated regularly. Dusty and dirty operating
conditions could cause dirt to get into the bearings and bushings, resulting in accelerated
wear. Lubricate the grease fittings immediately after every washing, regardless of the
interval specified.
1. Prepare the machine for maintenance.
2. Grease all machine fittings with No. 2 lithium grease.
3464-486A
G437877
Rear-axle tube
Back of the machine
Page 6–8 Maintenance: Pre-Maintenance Procedures