Parameter Settings Printout - MAGUIRE Weigh Scale Blender 4088 Installation Operation & Maintenance

Parameter Settings Printout

To print a copy of all internal parameters:
A USB Flash Drive must be connected to the USB port on the controller. Up to 13 lists will print, a
General list and 12 component lists. Only components that are turned "on" will print. Four
columns will print, RAM; ROM; 200 and 900 series tables; and EEPROM. Identifying headings
print above each column. Other print options can be sent to USB such as Print Totals, Print Alarm
History, Print Cycle History, Print Parameters, Print Alarm and Events, and the option to Print All
to USB.
Press Display will prompt for a password. (default: 22222)
Press System Configuration
Press Diagnostics
Press System Print Options
Press Print Parameters
Press
Display will show the System Configuration categories.
Display will show System Diagnostics Options
Display will show System Print Options:
Print Totals, Print Alarm History, Print Cycle History,
Print Parameters, Print Alarm and Events, Print All.
System will print parameters to USB to a file labeled:
PRINTER.TXT located in a folder named "maguire".
To save and exit or press the red X to cancel
and exit.
Then press:
81