MAGUIRE Weigh Scale Blender 4088 Installation Operation & Maintenance page 82

Weight Certification Printout
A Weight Certification Printout can be generated to a USB flash drive. This procedure requires a
certified weight be placed in the weigh bin at the time of generating the Weight Certification file.
The Weight Certification file is written to a USB flash drive into a folder named maguire. The file
output format is plain text ASCII with a file name as W<ID>CERT.txt. (example: W001CERT.txt
for ID number 1). Each unique ID number will have a new file create within the maguire folder.
For optimal accuracy, a zero and full weigh calibration is highly recommended prior to printout.
Weigh Certification file example:
Weight Certification
Date: 09/12/18
Time: 14:57:55
Machine Number: 1
WSB Model: 220
Serial Number: 123456
Empty Bin Tare Weight:
Weight On Display:
Signature: ______________________
How to create a Weigh Certification file:
Press
Press Weight Certification
Press Go to Zero and Full
Weight Calibration
Or Press Skip Zero and Full
Weight Calibration
Confirm Weigh Bin is EMPTY then:
Press
Press
Press
Press
82
x.x grams
x.x grams
Display will show Print Center options.
Display will show the WSB Weigh Certification screen.
to perform a Zero and Full Weigh Calibration prior to printing
the Weigh Certification document. (Recommended). Follow
on-screen prompts. Also see Load Cell Calibration on page 35.
After calibration, continue below.
to proceed with Weigh Certification printout without
performing a Zero and Full Weigh Calibration.
TARE to TARE the scale. Message will display: Tare successful.
Press ENTER to continue.
ENTER Message will display: Place certification weight into weigh bin.
Then Press PRINT button. The Current Weight will be
displayed on the screen.
to write the Weight Certification Printout to the USB drive.
Note: The USB Flash drive must be inserted into USB port on
the WSB controller to write the file to USB.
To exit from the Weight Certification screen and
return to the home screen.