Check Out Procedure And Diagnostics - MAGUIRE Weigh Scale Blender 4088 Installation Operation & Maintenance

Check Out Procedure
As you go through this procedure, if WHAT SHOULD HAPPEN, doesn't happen, see next section,
DIAGNOSTICS, for what to check.
MB/100/200 series models (3K load cells), display all weights in 1/10 grams (xxxx.x).
400/900/1200/1800/2400/3000 series models (10K load cells) display weights in FULL grams,
NO decimal point (xxxxx). On this page we show all weights with NO decimal point.
Start with NO MATERIAL in any hoppers.
Be sure an AIR SUPPLY is connected.
Turn POWER SWITCH OFF (front of controller).
PROCEDURE:
1. POWER UP CONTROLLER / Blender
PLUG IN CONTROLLER
TURN POWER ON
AT THIS POINT
TOUCH WEIGH BIN VERY LIGHTLY
2. OPERATE DISPENSE DEVICES
PRESS
PRESS
Blender Configuration
PRESS
Manual Operations
PRESS
32
WHAT SHOULD HAPPEN:
Nothing should happen.
Air pressure should be holding ALL valves CLOSED.
This means all air cylinders are extended. If any slide gate or
flap is open, air lines are reversed.
If a FLOW CONTROL VALVE is installed, check it. The flow
control valve should be closed when power is off.
The display should briefly show a power-on splash screen
followed by the main home screen. Across the top of the
home screen will display: Model, ID number, Mode, Date and
Time.
The Home Screen
displays the Main
Touchscreen view, which
includes a summary view
of the blender including
all enabled components,
settings, material types,
actual weight of material in the weigh bin. This number
should be zero, plus or minus several grams ( 20) to (-20).
Be sure the model number that displays matches your
blender model number. If this is not the case see two
sections ahead, SELECTING CORRECT MODEL.
Display should update the weight reflecting the light pressure
that you are exerting on the bin.
Display will show the Setup login screen.
then, press
Display will show all devices that can be manually
operated. Each button is a press to activate, press to
deactivate.
This enters the PROGRAM mode.
Display will show a menu of
options.