MAGUIRE Weigh Scale Blender 4088 Installation Operation & Maintenance page 54

Setting the IP Address, Subnet Mask, Gateway
Press
Press
Press Communications
Press TCP/IP Configuration
Static IP
Press
Enabling Modbus
Press
Press
Press Communications
Press Modbus Server
Press
54
Display will prompt for a password. (default: 22222)
Display will show the System Configuration categories.
Display will show the System Communications
categories.
Display will show the TCP/IP Configuration screen. On
this screen, enter the IP Address, Subnet Mask and
Default Gateway using the keypad to enter the number
or into the field highlighted in green. To advance to the next
DHCP field, touch the field you want to edit and type the desired
value. Or click Enable DHCP to use DHCP for IP
assignment. MAC address is shown for machine
identification.
To save the Changes.
Display will prompt for a password. (default: 22222)
Display will show the System Configuration
categories.
Display will show the System Communications
categories.
Display will show the Modbus Server screen. On this
screen, press the checkbox Enable to enable Modbus.
To save the Changes.
Then press:
Then press: