Updating Controller Firmware - MAGUIRE Weigh Scale Blender 4088 Installation Operation & Maintenance

Updating Controller Firmware

When the WSB Touchscreen Controller is turned on, the first screen displayed will show the
current firmware version. If necessary, the firmware in the WSB can be updated using a firmware
update supplied by Maguire Products. Firmware updates use the USB port located to the right of
the control screen. The following instructions detail how to do a firmware update.
Do not turn off controller or remove the flash drive while firmware
is updating! Doing so may corrupt the controller's firmware.
the firmware update onto a USB flash drive in a folder named "maguire".
Copy
Insert
the USB Flash drive into the USB port on the WSB.
Press
Press System Configuration
Press
Press Firmware Update
the file from the white display area on the left. If more than one firmware version is stored
Select
on the flash drive, multiple version will be displayed in the white display area. If the white
display area is blank, verify the XUF firmware update file exists on the USB flash drive in a
folder named maguire. Exit this screen and enter again to refresh the display window.
the version in the white panel on the left and press PROGRAM.
Highlight
Press
The display will show progress transferring the update from USB to the internal flash, then it
will show progress in verifying the update file. Then the controller will automatically reboot.
When the controller restarts the display will show progress updating to the new firmware.
When complete, the controller will automatically reboot with the latest firmware. The firmware
update is complete.
Additional Firmware Update Information
If the WSB Touchscreen ever becomes unresponsive and cannot load new firmware through the menu, rename the
firmware file to UPDATE.XUF and copy the file onto a flash drive into the root directory of the flash drive. With the
controller powered OFF insert the flash drive into the USB port of the WSB controller and then turn the controller
power ON. When the WSB controller is turned on, this UPDATE.XUF file will automatically load into the WSB
restoring the firmware and load factory defaults.
Software updates can be supplied electronically, via email or by download. Software updates are named according to
their date of release. For instance, WTR0228A.XUF can be interpreted as WT=Weigh Scale Touchscreen, S=2019
(T=2020, U=2021), 02=February, 28=February 28th, A= is the first revision for that day.
98
Display will prompt for password. (default: 22222)
Display will show the System Configuration categories.
Display will show System reset options.
Resets
The controller will search the maguire folder on the USB drive
for a firmware update file with the XUF extension.
To proceed with the firmware update or press the
red X to cancel and exit.
Then press: