B+K precision 2510B Series User Manual page 79

5. Press the softkey to configure the Logic.
• A dropdown menu containing the available options will appear.
6. Low sets the pattern to low on the selected channel. A low is a voltage level that is less than the
channel's trigger level or threshold level.
7. High sets the pattern to high on the selected channel. A high is a voltage level that is greater than
the channel's trigger level or threshold level.
8. Don't care sets the pattern to don't care on the selected channel. Any channel set to don't care is
ignored and is not used as part of the pattern.
9. However, if all channels in the pattern are set to Don't care, the oscilloscope will not trigger.
10. Adjust the trigger level for the selected analog channel by pressing the Trigger Level button and turning
the Universal Knob. Don't care doesn'tneed to set trigger level.
11. Use the
Universal Knob
• Repeately pressing
12. Press the softkey to select Time.
13. Use the Universal Knob
• Repeately pressing
Figure 5.27 Logic
to navigate the available options.
will navigate between the available choices.
to navigate the available options.
will navigate between the available choices.
Trigger 79