Table of Contents
Advertisement
Dropout Trigger
The dropout trigger includes two types: edge and state.
Edge
Trigger when the time interval (
through the trigger level to when the neighboring rising edge (or falling edge) passes through the trigger
level is greater than the timeout time set, as shown in the figure below.
Configure Edge Dropout Trigger
To configure an edge dropout trigger:
1. Press the
button to enter the trigger menu.
2. Press the
button to toggle between Edge and State type.
3. Press the
softkey to select Next Page.
•
Navigate to Page 2/3.
4. Press the
softkey to select Time.
5. Use the
Universal Knob
•
Pressing the
Universal Knob
T) from when the rising edge (or falling edge) of the input signal passes
Δ
Figure 5.22 Edge
to configure the limit range value.
will open the numeric keypad in the display.
Trigger
75
Advertisement
Table of Contents
