Table of Contents
Advertisement
•
Press the
•
Press the
– Turn the
Universal Knob
– Only peaks larger than the peak limit can be judged as peaks.
•
Press the
– Turn the
Universal Knob
amplitude on both sides..
– Only when the difference is greater than the peak value of peak offset can the peak value be
determined.
Marker Type
When Markers type is selected the user can customize the marker locations on the FFT waveform based
on search configuration.
•
Press the
– Press the
•
Press the
softkey enter the Search Config menu.
Figure 8.9 Peak Search Config Menu
softkey to select Threshold.
to set the minimum peak amplitude.
softkey to select Excursion.
to set the difference between the peak value and the minimum
Figure 8.10 Markers Type Menu
softkey to enter the Marker Control menu.
Figure 8.11 Markers Control Menu
softkey continuously to select the marker number from NO.1 to NO.8
softkey continuouslty to turn on or off the selected mark.
Math
120
Advertisement
Table of Contents
