Table of Contents
Advertisement
Save and Recall
140
It's the default storage type of the oscilloscope. It saves the settings of the oscilloscope
Setups:
in internal or external memory in "*.xml" format. The stored settings can be recalled.
Reference:
The oscilloscope saves the waveform data in "*.REF" format. The data of the channel is
your select channel. At recall, the data will be displayed on the screen by REFA or REFB.
BMP:
The oscilloscope saves the screen image in "*.bmp" format. You can specify the file name
and saving directory under the same directory using the same file name. The recall of
an image is not supported.
The oscilloscope saves the screen image in "*.jpg" format. You can specify the file name
JPG:
and saving directory under the same directory using the same file name. The recall of
an image is not supported.
The oscilloscope saves the screen image in "*.png" format. You can specify the file name
PNG:
and saving directory under the same directory using the same file name. The recall of
an image is not supported.
Binary:
The oscilloscope saves the waveform data in "*.BIN" format. The data of all the channels
turned on can be saved in the same file. The recall of binary is not supported.
CSV:
The oscilloscope saves the waveform data in "*.CSV" format. The stored files contain the
waveform data of the displayed analog channels and the main setting information of the
oscilloscope. The recall of CSV file is not supported.
Set the save type to CSV, and set the Param Save option to On or Off to turn on the
parameters storage function.
Matlab:
The oscilloscope saves the waveform data in "*.DAT" format. The data of all the channels
turned on can be saved in the same file. The recall of Matlab file is not supported.
The oscilloscope saves the factory config and user set config. Then you can select the
To Default Key:
default function is the factory config or user set config.
FileConverter:
The mini tool converts stored binary files to CSV format for viewing with a spreadsheet
program. It supports for file of waveform data (*.bin), file
of sample logger(*.slg) and file of measure logger (*.mlg) to convert.
This is ideal when collecting large datasets. For a waveform frame with deep memory such
as 12 Mpts, to save directly as a CSV file will take long time and will occupy a large amount
of memory on a USB storage device. It's recommended to save the data as binary file and
then convert it to CSV file on a computer.
Advertisement
Table of Contents
