Table of Contents
Advertisement
Servicing
Do not substitute parts that are not approved by B&K Precision or
modify this instrument. Return the instrument to B&K Precision for
service and repair to ensure that safety and performance features
are maintained.
Fuse replacement must be done by qualified service-trained
maintenance personnel who are aware of the instrument's fuse
requirements and safe replacement procedures. Disconnect the
instrument from the power line before replacing fuses. Replace
fuses only with new fuses of the fuse types, voltage ratings, and
current ratings specified in this manual or on the back of the
instrument. Failure to do so may damage the instrument, lead to a
safety hazard, or cause a fire. Failure to use the specified fuses will
void the warranty.
For continued safe use of the instrument
•
Do not place heavy objects on the instrument.
•
Do not obstruct cooling air flow to the instrument.
•
Do not place a hot soldering iron on the instrument.
•
Do not pull the instrument with the power cord, connected probe, or connected test lead.
•
Do not move the instrument when a probe is connected to a circuit being tested.
7
Advertisement
Table of Contents
