Table of Contents
Advertisement
Configure Slope Trigger
When trigger type is set to Slope the limit range and lower and upper trigger limits must be configured.
To et the Limit Range:
1. Press the
button to enter the trigger menu.
2. Press the
softkey to select
•
A dropdown menu containing the available options will appear.
3. Use the
Universal Knob
•
Repeately pressing
4. Press the
softkey to select Next Page
5. Press the
softkey to configure the Limit Range Value(s).
•
If a range type was selected pressing the
6. Use the
Universal Knob
•
Pressing the
Universal Knob
7. Press the
button to toggle between lower and upper trigger value.
8. Use the
Universal Knob
•
Pressing the
Universal Knob
theLimit Range
Figure 5.13 Limit Range
to navigate the available options.
will navigate between the available choices.
to configure the limit range value.
will open the numeric keypad in the display.
to configure the selected trigger value.
will open the numeric keypad in the display.
Type.
will toggle between the low and high limit.
Trigger
64
Advertisement
Table of Contents
