Table of Contents
Advertisement
State
Trigger when the time interval (
through the trigger level to when the neighboring falling edge (or rising edge) passes through the trigger
level is greater than the timeout time set, as shown in the figure below.
Configure State Dropout Trigger
To configure an state dropout trigger:
1. Press the
button to enter the trigger menu.
2. Press the
button to toggle between Edge and State type.
3. Press the
softkey to select Next Page.
•
Navigate to Page 2/3.
4. Press the
softkey to select Time.
5. Use the
Universal Knob
•
Pressing the
Universal Knob
Coupling and noise reject can be set in dropout trigger, see the sections
for more details.
Rejection
T) from when the rising edge (or falling edge) of the input signal passes
Δ
Figure 5.23 State
to configure the limit range value.
will open the numeric keypad in the display.
Trigger
and
Trigger Coupling
76
Noise
Advertisement
Table of Contents
