B+K precision 2510B Series User Manual page 66

Pulse Trigger
Pulse triggering sets the oscilloscope to trigger on a positive or negative pulse of a specified width. To
trigger on a specified timeout value, use
Coupling and noise reject can be set in edge trigger, see the sections
Reject.
Configure Pulse Trigger
When trigger type is set to Pulse the limit range and polarity must be configured.
To set the Limit Range:
1. Press the button to enter the trigger menu.
2. Press the button to toggle between positive and negative polarity.
3. Press the softkey to select the
• A dropdown menu containing the available options will appear.
4. Use the
Universal Knob
• Repeately pressing
Pattern Trigger.
Figure 5.14 Pulse Trigger
Limit Range
Figure 5.15 Limit Range
to navigate the available options.
will navigate between the available choices.
Trigger
Type.
Trigger 66
Coupling, and Noise