11. Press the
softkey to enter the Tools menu.
12. Press the
softkey to select Type.
•
A dropdown menu containing the available options will appear.
13. Use the
Universal Knob
•
Repeately pressing
The Tools menu will differ based on the type selected.
Peak Type
When Peak type is selected the peaks of the current FFT waveform will automatically be marked based
on the search configuration.
•
Press the
•
Press the
– Show Table must be enabled to view show frequency.
•
Press the
•
Press the
Figure 8.7 Type Options
to navigate the available options.
will navigate between the available choices.
Figure 8.8 Tools Peaks Menu
table to toggle the peak table On or Off.
to toggle the display of the frequency for each peak on the peak table.
to toggle the peak table sorting between Amplitude and Frequency.
softkey to nagivate to Page 2/2 of the Tools menu.
Math
119