5. Press the
softkey to select Next Page
6. Press the
softkey to configure the Limit Range Value(s).
•
If a range type was selected pressing the
7. Use the
Universal Knob
•
Pressing the
Universal Knob
Limit Range Types
< = (less than a time value)
Trigger when the input signal's positive or negative pulse time is lower than the specified time value. For
example, for a positive pulse, if you set t (pulse real width) ≤ 100ns, the waveform will trigger.
> = (greater than a time value)
Trigger when the input signal's positive or negative pulse time is greater than the specified time value.
For example, for a positive pulse, if you set t (pulse real width) ≥ 100ns, the waveform will trigger.
to configure the limit range value.
will open the numeric keypad in the display.
Figure 5.16 < = (less than a time value)
Figure 5.17 > = (greater than a time value)
will toggle between the low and high limit.
Trigger
67