B+K precision 2510B Series User Manual page 118

6. Return to the Math menu, Page 1/2.
7. Press the softkey to enter the Vertical menu.
• Press the
– Turn the Universal Knob
• Press the
– Turn the
Universal Knob
• Press the
– The vertical axis units can be set to dBVrms, dBm, Vrms or dBArms, Arms, which use a
logarithmic scale or a linear scale to display vertical amplitude respectively.
• Press the
– Turn the Universal Knob
8. Return to the Math menu, and navigate to Page 2/2 by pressing the
9. Press the softkey to enter the Horizontal menu.
• Press the
– Turn the Universal Knob to select the desired center frequency.
• Press the
– Turn the Universal Knob to select the desired span frequency.
10. Return to the Math menu, and navigate to Page 2/2.
Figure 8.5 Vertical Menu
softkey to select Scale,
to select the desired vertical FFT scale.
softkey to select Ref Level.
to select the desired vertical FFT offset.
softkey to select the unit of vertical axis.
softkey to select Ext Load.
to set the desired external load.
Figure 8.6 Horizontal Menu
softkey to select Center.
softkey to select Span.
Math 118
softkey.