Table of Contents
Advertisement
Step 4. Press the
•
Normal: Tracks the data at the time of T-Cursors.
•
Maximum: Tracks the maximum value of the data within a pixel of where the T-Cursors are
locatec.
•
Average: Tracks the average value of the data within a pixel of where the T-Cursors are
located.
•
Minimum: Tracks the minimum value fo the data within a pixel of where the T-Cursors are
located.
•
Peak: Tracks the data with the maximum deviation from the overall average value within a
pixel of where the T-Cursors are located. When two cursors are at the same position, T1
will track the maximum value and T2 will track the minimum value.
softkey to configure the Track Mode of the cursors.
Figure 19.8 Measure Logger Cursors
Measure Logger
181
Advertisement
Table of Contents
