Hmi Utilities Screen - Banner AMG Instruction Manual

DXM HTTP Status
Contains cellular signal strength (if applicable) along with cloud push statistics. By default, the AMG is configured with
Push disabled (shown at the bottom of the screen). When cloud push is turned on (via the DXM Configuration Screen)
the status changes in this window to Push Enabled.
Network Configuration
By default, the Ethernet Mode is configured with an IP address of 192.168.0.1 using the internal XML configuration file.
To manually change the IP address, toggle the Ethernet Mode to Static. Touch the Static IP Address fields and enter an
appropriate value. Press Save to apply the new settings. Toggle the Ethernet Mode field between Static, DHCP, and XML
Config (default settings and not intended to be user configured).

HMI Utilities Screen

HMI Details
Contains firmware and serial numbers of the internal HMI.
July 17, 2023
IMPORTANT: Banner Engineering Corp. does not recommend manually changing the default IP set­
tings of the internal XML configuration file. This can be detrimental to the programming of the AMG.
Asset Monitoring Gateway With SNAP ID Instruction Manual
DXM HTTP Status screen
DXM Network Configuration screen
© Banner Engineering Corp.
17