Asset Monitoring Gateway With SNAP ID Instruction Manual
Reset Options
Reset HMI resets the screen to the splash page and main window.
Run Panel Setup accesses the internal HMI startup menu to update the screen with new firmware.
Reset DXM resets the internal gateway but the HMI screen remains active.
Full System Reset triggers an entire reset of the AMG.
Security/Passwords
Logout secures the device to the current configuration; no settings can be changed without the administration password.
The default administration password, if prompted, is 8888.
Passwords displays the custom password table. There can be up to seven user passwords, configurable by entering and
saving new values within this screen. By default, Require Login at Startup is turned off to allow for initial set up and con
figuration.
18
HMI Reset screen
HMI Security/Passwords screen
© Banner Engineering Corp.
July 17, 2023