Banner AMG Instruction Manual page 15

1. Tap the Method button to toggle on the VIBE­IQ learning algorithm.
2. Tap Run Baseline and Yes to use the globally established settings to initialize the learning algorithm.
The number of samples the gateway has available (preferably up to 300) and the average value of the parameters is
shown.
Press Undo if more samples are required.
3.
The suggested banked samples needed to accurately characterize a rotating asset is 300. Running the baseline pro­
cedure with all 300 samples is recommended, but a sensor can be re-baselined at any time.
4. Press Close then Save to store the learned threshold information for each register within the register details.
July 17, 2023
Asset Monitoring Gateway With SNAP ID Instruction Manual
VIBE-IQ algorithm screen
Baseline data
© Banner Engineering Corp.
15