Vibration Sensor Runtime Thresholds
Applies only to the QM30VT2 vibration sensor running the VIBE-IQ® machine learning algorithm. This allows a user to
globally set, for all connected vibration sensors, how the threshold settings for a vibration sensor are applied. These
threshold settings define an active ON state for the monitored motor or rotating asset.
Definable ACTIVE ON values are the xaxis and zaxis velocity/acceleration. The sample period is the cycle time the al
gorithm uses to deem a sample applicable. The algorithm discards readings under the defined thresholds. VIBEIQ typi
cally requires 300 samples to accurately baseline a machine. If an application has a consistently operating rotating asset,
with low standard variability, it may be acceptable to quickly retrieve an accurate baseline with a shorter sampling period.
An asset with more extensive variability often requires a longer sampling period to characterize its behavior.
July 17, 2023
Asset Monitoring Gateway With SNAP ID Instruction Manual
Global VIBE-IQ screen
© Banner Engineering Corp.
13