Table of Contents
Advertisement
Thresholds
Allows the user to configure alarm states for the selected device.
Threshold 1 (Yellow) indicates a warning alarm.
Threshold 2 (Red) indicates a critical alarm.
These alarm states are reflected in the group area (if the sensor has been grouped) by the asset icon changing color to
reflect the alarm state. Alarms from any attached device are also indicated on the pendant light on the top left corner of
the enclosure. Critical alarms (red) take priority, followed by yellow, then green for normal operation indication.
Set thresholds for specific registers by touching the thresholds in the table and manually typing in an alarm value. This
prompts the AMG to enable the Mode operator. Tap the mode operator to browse through the operands and select the in
tended one. Select Save when you are satisfied with the alarm data, and then Yes for confirmation. Thresholds saved ap
pears at the bottom of the screen after the settings are saved.
July 17, 2023
Asset Monitoring Gateway With SNAP ID Instruction Manual
Sensor List Thresholds screen
Operations screen
© Banner Engineering Corp.
11
Advertisement
Table of Contents
