Parts List - Renishaw RMP40 Installation Manual

Section 8, "Parts list"

Parts list

Type
RMP40
RMP40M module
Battery
Stylus
Probe tool kit
Battery cassette
Cassette seal
RMI
RMI-Q
Mounting bracket
Styli tool
LP2
LPE1
LPE2
LPE3
MA4
Publications. These can be downloaded from our web site at www.renishaw.com.
RMP40
RMI
RMI-Q
Styli
Probe software
Taper shanks
Part number Description
A-5480-0001 RMP40 probe with batteries, tool kit and quick-start guide
(factory-set to radio on / radio off, trigger filter off).
A-5628-0001 RMP40M module with batteries, tool kit and quick-start guide
(factory-set to radio on / radio off, trigger filter off).
½AA battery – lithium-thionyl chloride (two required).
P-BT03-0007
A-5000-3709 PS3-1C ceramic stylus 50 mm long with Ø6 mm ball.
A-4071-0060 Kit comprising: Ø1.98 mm stylus tool, 2 mm A/F hexagon key,
M4 × 6 mm cone point grub screw (× 2), and M4 × 6 mm flat
point grub screw (× 4).
A-4071-1166 RMP40 battery cassette assembly.
A-4038-0301 Battery cassette housing seal.
A-4113-0050 RMI (side exit) with 15 m (49.2 ft) cable, tool kit and user's
guide.
A-5687-0050 RMI-Q (side exit) with 15 m (49.2 ft) cable, tool kit and user's
guide.
A-2033-0830 Mounting bracket with fixing screws, washers and nuts.
M-5000-3707 Tool for tightening/releasing styli.
A-2063-6098 LP2 probe.
A-2063-7001 LPE1 extension bar – 50 mm long.
A-2063-7002 LPE2 extension bar – 100 mm long.
A-2063-7003 LPE3 extension bar – 150 mm long.
A-2063-7600 MA4 90° adaptor assembly.
H-5480-8500 Quick-start guide: for rapid set-up of the RMP40 probe.
A-4113-8550 Quick-start guide: for rapid set-up of the RMI (includes CD
with installation guides).
H-5687-8500 Quick-start guide: for rapid set-up of the RMI-Q.
H-1000-3200 Technical specifications guide: Styli and accessories – or visit
our Web shop at www.renishaw.com/shop.
H-2000-2298 Data sheet: Probe software for machine tools – programs and
features.
H-2000-2011 Data sheet: taper shanks for machine tool probes.
8.1