SpectraLink NetLink e340 Supplementary Manual page 5

set service-profile vowlan-wpa2 cipher-tkip disable
set service-profile vowlan-wpa2 cipher-ccmp enable
set service-profile vowlan-wpa2 auth-dot1x disable
set service-profile vowlan-wpa2 auth-psk enable
set service-profile vowlan-wpa2 psk-raw <256-bit passkey>
WPA-PSK
Assume you are creating service profile "vowlan-wpa" to define the ESSID "phones", as
well as a WPA-PSK security policy. The following commands are needed to set up the
service for AP3750s:
set service-profile vowlan-wpa ssid-name phones
set service-profile vowlan-wpa wpa-ie enable
set service-profile vowlan-wpa rsn-ie disable
set service-profile vowlan-wpa cipher-tkip enable
set service-profile vowlan-wpa cipher-ccmp disable
set service-profile vowlan-wpa auth-dot1x disable
set service-profile vowlan-wpa auth-psk enable
set service-profile vowlan-wpa psk-raw <256-bit passkey>
Radio profile commands
Assume you are creating radio profile "voice" for all radios that will be providing voice
services. The following commands are needed to set up the radio profile for the access
points:
set radio-profile voice service-profile vowlan-wpa2
# maps the service profile to the radio profile
set radio-profile voice dtim-interval
set radio-profile voice active-scan disable
# prevents the AP from going off-channel to scan
set radio-profile voice wmm disable
# wmm must be disabled for SVP to be supported
PN: 72-9966-00-D.doc Page 5