SpectraLink NetLink e340 Supplementary Manual page 13

set igmp querier disable vlan 1
set igmp mrsol disable vlan 1
set igmp version 2 vlan 1
set igmp mrsol mrsi 30 vlan 1
set igmp qi 125 vlan 1
set igmp oqi 255 vlan 1
set igmp qri 100 vlan 1
set igmp lmqi 10 vlan 1
set igmp rv 2 vlan 1
set igmp mrouter port 3 disable
set igmp receiver port 3 disable
# disable router and receivers on other ports as appropriate
set fdb agingtime 1 age 300
set interface 1 ip 10.30.1.1 255.0.0.0
set mobility-domain mode seed domain-name mobdom
set mobility-domain member 10.30.1.2
set security acl ip SVP permit cos 7 119 0.0.0.0 255.255.255.255
0.0.0.0 255.255.255.255
set security acl ip SVP permit 0.0.0.0 255.255.255.255
set security acl map SVP vlan v1 out
commit security acl SVP
set ntp disable
set ntp update-interval 64
If you are performing cross-subnet roaming, this command must be issued on the
"remote" Wireless Switch (the one that doesn't have the VLAN statically configured.
This command must be re-issued whenever the tunnel is re-established, since IGMP
snooping is (re)enabled each time. A future 3Com release will resolve this limitation.
set igmp disable vlan v1
PN: 72-9966-00-D.doc Page 13