SpectraLink Corporation
1.
About This Document
This document explains how to configure and maintain the NetLink e340, h340 and
i640 Wireless Telephones (handsets) when used with the NetLink Telephony
Gateway.
1.1
SpectraLink Corporation Model Numbers
This document covers the following registered model numbers:
SNP2400, RNP2400
1.2
Related Documents
NetLink Telephony Gateway: Installation, Configuration, and Administration
(72-0065-02)
NetLink SVP Server: Installation, Configuration, and Administration (72-0178-02)
Available at http://www.spectralink.com/resources/manual_netlink.jsp.
LinkPlus Interface Guide (72-0171-xx where xx indicates a number corresponding to
the type of PBX)
Available at http://www.spectralink.com/resources/interface_guides.jsp.
NetLink Wireless Telephone WLAN Compatibility List (72-9000-00)
Access Point Configuration Note (72-99xx-00 where xx indicates a number
corresponding to the type of access point.).
Available at http://www.spectralink.com/resources/wifi_compatibility.jsp.
Deploying NetLink Wireless Telephones: Best Practices white paper.
Available at http://www.spectralink.com/resources/white_papers.jsp.
1.3
Customer Support Hotline
SpectraLink wants you to have a successful installation. If you have questions please
contact the Customer Support Hotline at (800) 775-5330. The hotline is open
Monday through Friday, 6 a.m. to 6 p.m. Mountain time.
1.4
Icons and Conventions
This manual uses the following icons and conventions.
Caution! Follow these instructions carefully to avoid danger.
Note these instructions carefully.
This typeface indicates a key, label, or button on the NetLink Wireless
NORM
Telephone (handset)..
PN: 72-1065-09-H.doc
Configuration and Administration–NetLink e340,/h340/ i640 Wireless Telephone
NetLink Telephony Gateway and SpectraLink Radio Protocol
Page 5
Need help?
Do you have a question about the NetLink e340 and is the answer not in the manual?
Questions and answers