SpectraLink NetLink i640 Technical Bulletin

Cisco SCCP Registration File Format Requirements
Date:
Software Versions:
Hardware Revisions:
Product Type:
Access Level:

Problem

The NetLink i640 or e340 Wireless Telephone does not register to the designated
primary CallManager (in the Device Pool list). Additionally the handset may display the
error "Registration Rejection: Device Mismatch" upon registration.

Description

SpectraLink Wireless Telephones require .cnf formatted configuration files, not .cnf.xml
files. These files instruct the handset as to which CallManager to register to and the
specific phone emulation type. If they are not found the CallManager will download a
default file called SEPDEFAULT.cnf which could be configured to point to the
inappropriate CallManager (or configure it as the wrong phone emulation type) by
default.

Examples of file formats:

(note that each handset has its own specific file (MAC address specific))
What we require: SEP00907A01C291.CNF
What we do not support: SEP00907A01C291.CNF.XML

Resolution

Ensure that the CallManager service "BuildCNFType" is configured for "Build All"
otherwise the CallManager does not provide the SpectraLink Wireless Telephones with
the proper configuration file format during the TFTP process during registration.
THE INFORMATION PROVIDED IN THE SPECTRALINK TECHNICAL BULLETIN IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. NO
OBLIGATION OR LIABILITY WILL ARISE OUT OF, SPECTRALINK RENDERING TECHNICAL OR OTHER ADVICE OR SERVICE IN CONNECTION
SpectraLink Corporation • 5755 Central Avenue • Boulder, Colorado 80301 • 303.440.5330
July 13, 2004
All
SCCP Protocol
NetLink Wireless Telephones
General
HEREWITH.
Technical Bulletin CS-04-07
Originator:
Approvers:
Status:
Revision:
Matt Jerger
Wayne McAllister
Gary Bliss
Approved
A