Edit; Send - SHOWTEC Indigo 5500 Manual

4.2. Edit

With this menu you are able to set a wide variety of special settings.
You first have to create a Step and press enter. Then the entire Menu will appear
1) Press Menu, until the display shows: Runmode
2) Press Enter, until the display shows: Edit
3) Press Enter and then create a Step and press enter.
4) Now use the Up/Down buttons to scroll through the options: Pan, Tilt, Color, Gobo1, Gobo2, Gobo2Rot,
Prism Rotation, Focus, Dimmer, Strobe, Time, Use.
5) Press enter to open this menu. Use the Up / Down buttons to set the desired setting.
6) Once you have set the desired mode, press the enter button to store your setting.
Note: If you want to circulate the created steps, please set the last step as 0.
For example, when you have 3 steps, the setting should be:
Step 1 Time = 4
Step 2 Time = 5
Step 3 Time = 0

4.3 Send

1) Press Menu, until the display shows: Send
2) Press Enter and use the Up/Down buttons to choose: Yes or No.
3) If you use Yes, the device will send all settings to in-line fixtures.
Use = Yes
Use = Yes
Use = Yes
19
.